- Send Sherer
Dental Lab
your preliminary
impression
or an unprepared
study model.
- We will
analyze your
treatment
plan and following
your Rx, construct
a template,
then prepare
and/or extract
the involved
teeth on the
model, and
fabricate
your custom
QTemps.
- After you
receive your
QTemps, prepare
the natural
teeth with
standard C&B
methods and
take final
impression.
- Confirm
seating of
QTemps and
adjust internal
aspect if
necessary.
- Moisten
internal surface
of QTemps
with monomer
if using conventional
acrylic or
bonding agent
if using one
of the cartridge
light-cured
provisional
materials.
- Mix and
place chairside
acrylic resin
or light-cured
provisional
material into
QTemps and
lubricate
tooth preparations.
- Seat QTemps
onto tooth
preparations
- allowing
acrylic to
set to doughy
stage or tacking
light-cured
material with
light for
3-5 seconds.
- Remove and
trim bulk
excess. Reseat
and trim any
remaining
excess. Finalize
cure with
light if necessary.
- Remove QTemps
and polish
if needed.
- The relined
QTemps can
now be seated/cemented
using conventional
materials
and methods.
|
|
 |
 |
Design
Copyright ©2003 352
Media Group.